Welcome to our guide for Rally Mechanic Simulator Prologue! In just one hour, we’ll help you conquer all 10 achievements, including 9 easy ones and 1 hard one. Get ready to become a pro at this game!
Intro
- Estimated 100% time: 1 hour
- Difficulty: 9 easy achievements, 1 hard achievement
This is a step-by-step guide written to complete all achievements in an efficient way.
WARNING: This game does not have a saving feature, you have to complete all achievements in one session.
Tutorial and 1st rally
Tip: To save some time when assembling/disassembling screws, you can move your mouse to the next screw as soon as the first one has started moving and glowing green.
After you’re done with the tutorial, go straight to the laptop and select “Prologue rally route 1” (asphalt). Go ahead and complete it, it should be very similar to the tutorial and give you these 2 achievements (if they haven’t popped already).
Here are some examples of the issues and parts that need to be repaired (Air leaks, front suspension, another air leaks+suspension, door):
Garage
Once you return to the garage, left click (don’t hold) the front left door of the car, then left click the driver’s seat and press “E”.
First, right click -> Parts Shop -> Main shop. Type “gravel” in the top-right search bar and buy two of each part in the resulting list.
Also buy 4 rims (any) in the “Rims” section and 4 Wet-gravel tires in the “Tires” section.
We will use all these parts later.
Then, in the parts shop go to “Car body tuning” section. Buy one of each car part in that section: (variants B C D don’t matter).
- Front bumper
- Hood
- Left mirror
- Right mirror
- Rear bumper
- Rear spoiler
- Roof vent
Install your custom parts onto the car.
Disassemble all the asphalt-appropriate parts of your car: 4 wheels + 4 brake disks, 4 shock abosrbers, 1×2 front suspension parts, 3×2 back suspension parts (they’re all blue).
You will also have to disassemble some broken parts after your last rally, to do that go into “Test mode” and click&hold on different parts of the car, if they’re red or orange you should repair them. You can also use “Car status” to give you hints on what’s broken.
Attach tires to the rims and balance them. Repair all your disassembled parts. You can double-tap “Space” when you hit green, that way it starts the next mini-game round right away.
Finally, assemble all your gravel-appropriate parts, wash your car, right click -> Map -> Test drive.
Test drive
Ram into a wall at high speed.
This is the only skill-based achievement and it is quite difficult, watch the video to see how it could be done. You can cut the track across the field right after the 2nd turn, aim for the white flowers.
I also suggest pressing both “S” and “Space” when turning.
Credits for the video to steam user DlaxBear
If you haven’t gotten this while doing “Better than devs” achievement, just keep doing laps and drifting. It does not have to be consecutive, but it must be during a single test drive.
After you’re done, go back to the garage.
Final rally
Go straight to the laptop and press space to start the next rally, you should get the dirty car achievement. Then, after washing, your car should already be ready for the final rally (you do not need Dry-gravel tires).
Finish the rally just like the first one. (If you want to save time, you probably don’t even have to repair everything during the rally breaks, as you do not need to actually win it. However I have not tested this and completed the prologue by fixing all issues and finishing first).
Conclusion
If you find this guide helpful, please rate it.
An award would be especially appreciated.
And that wraps up our share on Rally Mechanic Simulator Prologue: 100% Achievement Walkthrough. If you have any additional insights or tips to contribute, don’t hesitate to drop a comment below. For a more in-depth read, you can refer to the original article here by Bakker, who deserves all the credit. Happy gaming!